Coded diagnoses/problems addressed during the encounter. The diagnoses attribute has three components:

• diagnosis (code)
• presentOnAdmissionIndicator (code)
• rank (positive integer)

To reference an encounter diagnosis, the expression must include the diagnosis code component. The other components are optional. The expression should only include the presentOnAdmissionIndicator if it is necessary to reference present on admission and should only include the rank if it is necessary to reference principal diagnosis.

The "Encounter, Performed" diagnosis attribute is intended to capture ALL diagnoses, including the principal diagnosis, i.e., all diagnoses addressed during the encounter represented by the diagnosis (code) used in the expression.The presentOnAdmissionIndicator (code) allows the eCQM developer to include criteria about whether each specific "Encounter, Performed" diagnosis was present at the time of admission (an indicator used to evaluate patient safety and adverse events). See presentOnAdmissionIndicator attribute definition for information about using the "Encounter, Performed" diagnosis attribute.

The "Encounter, Performed" diagnosis (rank) replaces the principal diagnosis attribute. To reference a principal diagnosis, eCQM developers should express the "Encounter, Performed" diagnosis with a diagnosis (code) and a rank of 1. See definition of rank attribute.

With an "Encounter, Performed" diagnosis, there is no dependency on the timing of the diagnosis in relation to the encounter.

• Use of the "Encounter, Performed": diagnoses attribute component and the "Diagnosis" datatype is redundant for relating the diagnosis to the "Encounter, Performed". The "Encounter, Performed": diagnoses component syntax is preferred.
• Referencing the same diagnosis using "Encounter, Performed" (diagnoses attribute) and "Diagnosis" (datatype) should only occur if the measure must define a specified length of a prevalencePeriod, e.g.,
  • The measure must assure that the diagnoses
    • have been present for at least some defined time period before the encounter, and
    • were addressed during the "Encounter, Performed"

Coded diagnoses/problems addressed during the encounter. The diagnoses attribute has three components:

• diagnosis (code)
• presentOnAdmissionIndicator (code)
• rank (positive integer)

To reference an encounter diagnosis, the expression must include the diagnosis code component. The other components are optional. The expression should only include the presentOnAdmissionIndicator if it is necessary to reference present on admission and should only include the rank if it is necessary to reference principal diagnosis.

The "Encounter, Performed" diagnosis attribute is intended to capture ALL diagnoses, including the principal diagnosis, i.e., all diagnoses addressed during the encounter represented by the diagnosis (code) used in the expression.The presentOnAdmissionIndicator (code) allows the eCQM developer to include criteria about whether each specific "Encounter, Performed" diagnosis was present at the time of admission (an indicator used to evaluate patient safety and adverse events). See presentOnAdmissionIndicator attribute definition for information about using the "Encounter, Performed" diagnosis attribute.

The "Encounter, Performed" diagnosis (rank) replaces the principal diagnosis attribute. To reference a principal diagnosis, eCQM developers should express the "Encounter, Performed" diagnosis with a diagnosis (code) and a rank of 1. See definition of rank attribute.

With an "Encounter, Performed" diagnosis, there is no dependency on the timing of the diagnosis in relation to the encounter.

• Use of the "Encounter, Performed": diagnoses attribute component and the "Diagnosis" datatype is redundant for relating the diagnosis to the "Encounter, Performed". The "Encounter, Performed": diagnoses component syntax is preferred.
• Referencing the same diagnosis using "Encounter, Performed" (diagnoses attribute) and "Diagnosis" (datatype) should only occur if the measure must define a specified length of a prevalencePeriod, e.g.,
  • The measure must assure that the diagnoses
    • have been present for at least some defined time period before the encounter, and
    • were addressed during the "Encounter, Performed"

Coded diagnoses/problems addressed during the encounter. The diagnoses attribute has three components:

• diagnosis (code)
• presentOnAdmissionIndicator (code)
• rank (positive integer)

To reference an encounter diagnosis, the expression must include the diagnosis code component. The other components are optional. The expression should only include the presentOnAdmissionIndicator if it is necessary to reference present on admission and should only include the rank if it is necessary to reference principal diagnosis.

The "Encounter, Performed" diagnosis attribute is intended to capture ALL diagnoses, including the principal diagnosis, i.e., all diagnoses addressed during the encounter represented by the diagnosis (code) used in the expression.The presentOnAdmissionIndicator (code) allows the eCQM developer to include criteria about whether each specific "Encounter, Performed" diagnosis was present at the time of admission (an indicator used to evaluate patient safety and adverse events). See presentOnAdmissionIndicator attribute definition for information about using the "Encounter, Performed" diagnosis attribute.

The "Encounter, Performed" diagnosis (rank) replaces the principal diagnosis attribute. To reference a principal diagnosis, eCQM developers should express the "Encounter, Performed" diagnosis with a diagnosis (code) and a rank of 1. See definition of rank attribute.

With an "Encounter, Performed" diagnosis, there is no dependency on the timing of the diagnosis in relation to the encounter.

• Use of the "Encounter, Performed": diagnoses attribute component and the "Diagnosis" datatype is redundant for relating the diagnosis to the "Encounter, Performed". The "Encounter, Performed": diagnoses component syntax is preferred.
• Referencing the same diagnosis using "Encounter, Performed" (diagnoses attribute) and "Diagnosis" (datatype) should only occur if the measure must define a specified length of a prevalencePeriod, e.g.,
  • The measure must assure that the diagnoses
    • have been present for at least some defined time period before the encounter, and
    • were addressed during the "Encounter, Performed"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

Timing:

• The relevantPeriod addresses:
  • startTime - The time the encounter began (admission time).
  • stopTime - The time the encounter ended (discharge time).
• author dateTime references the time the action was recorded.
• Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

• negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
• The locationPeriod is an attribute of the attribute facility location that addresses:
  • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
  • stopTime - the time the patient departed from the location.

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

Timing:

• The relevantPeriod addresses:
  • startTime - The time the encounter began (admission time).
  • stopTime - The time the encounter ended (discharge time).
• author dateTime references the time the action was recorded.
• Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

• negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
• The locationPeriod is an attribute of the attribute facility location that addresses:
  • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
  • stopTime - the time the patient departed from the location.

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

Timing:

• The relevantPeriod addresses:
  • startTime - The time the encounter began (admission time).
  • stopTime - The time the encounter ended (discharge time).
• author dateTime references the time the action was recorded.
• Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

• negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
• The locationPeriod is an attribute of the attribute facility location that addresses:
  • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
  • stopTime - the time the patient departed from the location.

Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set.

Timing: The time the order is signed; author dateTime.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing:

• relevant dateTime references the time the intervention is performed when the intervention occurs at a single point in time.
• relevantPeriod references a start and stop time for an intervention that occurs over a time interval. relevantPeriod addresses:
  • startTime - The time the intervention begins.
  • stopTime - The time the intervention ends.
• author dateTime references the time the action was recorded.
• Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes:

• Timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.
• negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
   

Data elements that meet criteria using this datatype should document that the medications indicated by the QDM category and its corresponding value set should be taken by or given to the patient after being discharged from an inpatient encounter.

Note: the QDM "Medication, Discharge" datatype includes the supply attribute since some EHRs populate some medications on the medications discharge list provided to the patient from prescriptions written at discharge. Therefore, such newly prescribed medications may include the supply prescribed. Other medications on the discharge medication list will not have supply information since they represent medications for which the patient already has a supply at home or those the patient may purchase without prescription (i.e., over-the-counter). Thus, measure developers need to address data availability and feasibility when using the supply attribute with "Medication, Discharge".

Timing: The time the discharge medication list on the discharge instruction form is authored.

The "Medication, Discharge" QDM datatype includes two performers or actors - prescriber and recorder. The list of medications a patient should take after hospital discharge may come from two sources. The first source originates from medications ordered from a community pharmacy directly from the clinical software (e.g., eprescribing). That source will include the prescriber. The second method of providing content for the discharge medication list is via entry of medications known to be present in the home or over-the-counter substances, neither of which result in a prescription. The individual entering these latter medications is the recorder. Hence, content in the discharge medication list may include both performers.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
 

Indicates the reason that an action was not performed. Only QDM datatypes that represent actions (e.g., performed, recommended, communication, order, dispensed) allow the negation rationale attribute. The intent is to indicate a justification that such action did not happen as expected. This attribute specifically does not address the presence or absence of information in a clinical record (e.g., documented absence of allergies versus lack of documentation about allergies). QDM assumes a world view that absence of evidence indicates information does not exist or an action did not happen. To express such lack of evidence, an eCQM author should use the CQL expression not exists with reference to the data element rather than the QDM data model. negation rationale in QDM signifies only a reason for such absence, i.e., the reason must be present to qualify for negation rationale. The syntax in the human readable HQMF is addressed in CQL examples and in the MAT User Guide. Prior versions of QDM used the syntax, "Procedure, Performed not done." QDM versions starting with 5.3 use the syntax, "Procedure, not Performed." Section A-5 provides examples for expressing negation rationale in CQL.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Indicates the reason that an action was not performed. Only QDM datatypes that represent actions (e.g., performed, recommended, communication, order, dispensed) allow the negation rationale attribute. The intent is to indicate a justification that such action did not happen as expected. This attribute specifically does not address the presence or absence of information in a clinical record (e.g., documented absence of allergies versus lack of documentation about allergies). QDM assumes a world view that absence of evidence indicates information does not exist or an action did not happen. To express such lack of evidence, an eCQM author should use the CQL expression not exists with reference to the data element rather than the QDM data model. negation rationale in QDM signifies only a reason for such absence, i.e., the reason must be present to qualify for negation rationale. The syntax in the human readable HQMF is addressed in CQL examples and in the MAT User Guide. Prior versions of QDM used the syntax, "Procedure, Performed not done." QDM versions starting with 5.3 use the syntax, "Procedure, not Performed." Section A-5 provides examples for expressing negation rationale in CQL.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

The "Patient Characteristic Birthdate" should document the patient’s date of birth.

Timing: The "Patient Characteristic, Birthdate" is a single point in time representing the date and time of birth. It does not have a start and stop time.

Note: "Patient Characteristic Birthdate" is fixed to LOINC code 21112-8 (Birth date) and therefore cannot be further qualified with a value set.

Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set.

Timing: Ethnicity does not have a specific timing. Measures using "Patient Characteristic, Ethnicity" should address the most recent entry in the clinical record.

Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set.

Timing:

The relevantPeriod addresses:

• startTime – the first day of insurance coverage with the referenced payer.
• stopTime – the last day of insurance coverage with the referenced payer.

Data elements that meet criteria using this datatype should document the patient’s race.

Timing: Race does not have a specific timing. Measures using "Patient Characteristic, Race" should address the most recent entry in the clinical record.

Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set.

Timing: Birth (administrative) sex does not have a specific timing.

Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set.

Timing:

• relevant dateTime references the time the procedure is performed when the procedure occurs at a single point in time.
• relevantPeriod references a start and stop time for a procedure that occurs over a time interval. relevantPeriod addresses:
  • startTime - The time the procedure begins.
  • stopTime - The time the procedure ends.
• author dateTime references the time the action was recorded.
• Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes: 

• Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request.
• The incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.
• negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
• For clarification, see Appendix 6.6 with 2020 guidance about differentiating between successful and unsuccessful procedures.