Back to top
Top
DERep Home Page

Statin Therapy for the Prevention and Treatment of Cardiovascular Disease

CMS Measure ID: CMS347v6    Performance/Reporting Period: 2023    Version: 6    NQF Number: Not Applicable
Description:

Percentage of the following patients - all considered at high risk of cardiovascular events - who were prescribed or were on statin therapy during the measurement period:

*All patients with an active diagnosis of clinical atherosclerotic cardiovascular disease (ASCVD) or ever had an ASCVD procedure; OR

*Patients aged >= 20 years who have ever had a low-density lipoprotein cholesterol (LDL-C) level >= 190 mg/dL or were previously diagnosed with or currently have an active diagnosis of familial hypercholesterolemia; OR

*Patients aged 40-75 years with a diagnosis of diabetes

Data Elements and coded QDM Attributes contained within the eCQM

+ Expand all

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of an allergy to statin medications.
Data Element Scope: This value set may use a model element related to Allergy/Intolerance.
Inclusion Criteria: Includes concepts that define an allergy to statin medications.
Exclusion Criteria: No exclusions.

Constrained to codes in the Adverse Event: Statin Allergen value set (2.16.840.1.113762.1.4.1110.42)

QDM Datatype and Definition

"Adverse Event"

Data elements that meet criteria using this datatype should document the adverse event and its corresponding value set.

The relevant dateTime references the adverse event occurred.

The author dateTime references the time the adverse event was recorded.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of an allergy to statin medications.
Data Element Scope: This value set may use a model element related to Allergy/Intolerance.
Inclusion Criteria: Includes concepts that define an allergy to statin medications.
Exclusion Criteria: No exclusions.

Constrained to codes in the Allergy, Intolerance: Statin Allergen value set (2.16.840.1.113762.1.4.1110.42)

QDM Datatype and Definition

"Allergy Intolerance"

Data elements that meet criteria using this datatype should document the allergy or intolerance and its corresponding value set.

Timing:

  • The prevalencePeriod references the time from the onset date to the abatement date. Often an abatement date is not present as allergy or intolerance is ongoing.
  • The author dateTime references the recorded time.
Direct Reference Code

Constrained to 'Functional Assessment of Chronic Illness Therapy - Palliative Care Questionnaire (FACIT-Pal)' LOINC code

QDM Datatype and Definition

"Assessment, Performed"

Data elements that meet criteria using this datatype should document completion of the assessment indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references timing for an assessment that occurs at a single point in time.
  • relevant Period references a start and stop time for an assessment that occurs over a time interval
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Direct Reference Code

Constrained to 'Hospice care [Minimum Data Set]' LOINC code

QDM Datatype and Definition

"Assessment, Performed"

Data elements that meet criteria using this datatype should document completion of the assessment indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references timing for an assessment that occurs at a single point in time.
  • relevant Period references a start and stop time for an assessment that occurs over a time interval
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for diagnoses of atherosclerosis or peripheral artery disease (PAD).
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent conditions that indicate arterial blood flow is restricted.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Atherosclerosis and Peripheral Arterial Disease value set (2.16.840.1.113762.1.4.1047.21)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for active breastfeeding.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of lactation and the actual finding or intention of breastfeeding or nursing.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Breastfeeding value set (2.16.840.1.113762.1.4.1047.73)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for stroke and high risk diagnoses associated with stroke, including transient ischemic attack (TIA) and generalized ischemic cerebrovascular disease, which would indicate a patient has atherosclerotic cardiovascular disease (ASCVD) in relation to a cerebrovascular event.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of atherosclerotic cardiovascular disease (ASCVD) of cerebrovascular origin.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Cerebrovascular Disease Stroke or TIA value set (2.16.840.1.113762.1.4.1047.44)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for a diagnosis of diabetes.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of type I or type II diabetes.
Exclusion Criteria: Excludes concepts that represent a diagnosis of gestational diabetes or steroid-induced diabetes.

Constrained to codes in the Diagnosis: Diabetes value set (2.16.840.1.113883.3.464.1003.103.12.1001)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Direct Reference Code

Constrained to 'Encounter for palliative care' ICD10CM code

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for diagnoses of end stage renal disease (ESRD).
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of end stage renal disease (ESRD).
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: End Stage Renal Disease value set (2.16.840.1.113883.3.526.3.353)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for familial hypercholesterolemia.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of familial hypercholesterolemia.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Familial Hypercholesterolemia value set (2.16.840.1.113762.1.4.1047.100)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for a diagnosis of Hepatitis A infection.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of Hepatitis A.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Hepatitis A value set (2.16.840.1.113883.3.464.1003.110.12.1024)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of diagnoses for acute or chronic Hepatitis B infections.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of acute or chronic Hepatitis B.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Hepatitis B 2.16.840.1.113883.3.67.1.101.1.269 value set (2.16.840.1.113883.3.67.1.101.1.269)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for diagnoses of ischemic heart disease and associated diagnoses related to atherosclerotic cardiovascular disease (ASCVD).
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of acute and chronic forms of ischemic heart disease as well as coronary occlusion, thrombosis, or rupture that can be related to ASCVD.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Ischemic Heart Disease or Other Related Diagnoses value set (2.16.840.1.113762.1.4.1047.46)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for diagnoses of liver disease.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis for acute and chronic liver conditions that may represent the liver is failing. Examples of conditions include concepts associated with, but are not limited to, the following: alcoholic liver damage, cirrhosis, hepatitis C and E, and liver necrosis.
Exclusion Criteria: Excludes concepts that represent diagnoses for Hepatitis A and Hepatitis B.

Constrained to codes in the Diagnosis: Liver Disease value set (2.16.840.1.113762.1.4.1047.42)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for diagnoses of myocardial infarction.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of myocardial infarction.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Myocardial Infarction value set (2.16.840.1.113883.3.526.3.403)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for diagnoses of rhabdomyolysis.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of rhabdomyolysis.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Rhabdomyolysis value set (2.16.840.1.113762.1.4.1047.102)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for diagnoses of angina.
Data Element Scope: This value set may use a model element related to Diagnosis.
Inclusion Criteria: Includes concepts that represent a diagnosis of angina, including: stable and unstable angina, pre and post infarction angina, angina decubitus, intermediate coronary syndrome, other unspecified angina or sequelae of myocardial infarction, and other forms of angina pectoris.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Stable and Unstable Angina value set (2.16.840.1.113762.1.4.1047.47)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: n/a Data Element Scope: n/a Inclusion Criteria: n/a Exclusion Criteria: n/a

Constrained to codes in the Diagnosis: Statin Associated Muscle Symptoms value set (2.16.840.1.113762.1.4.1108.85)

QDM Datatype and Definition

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for annual wellness visits.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for a Medicare annual wellness visit.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Annual Wellness Visit value set (2.16.840.1.113883.3.526.3.1240)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of inpatient hospitalization encounters.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for inpatient hospitalizations.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Encounter Inpatient value set (2.16.840.1.113883.3.666.5.307)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for hospice care services.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent hospice services in a hospice, home or inpatient setting.
Exclusion Criteria: Excludes concepts that represent palliative care or comfort measures.

Constrained to codes in the Encounter, Performed: Hospice Encounter value set (2.16.840.1.113883.3.464.1003.1003)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for an outpatient visit.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for the comprehensive history, evaluation, and management of a patient presenting with minor to high severity problems.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Office Visit value set (2.16.840.1.113883.3.464.1003.101.12.1001)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for outpatient interactions with a member of the medical care team.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for the comprehensive history, evaluation, and management of a patient presenting with minor to high severity problems.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Outpatient Consultation value set (2.16.840.1.113883.3.464.1003.101.12.1008)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of an encounter for outpatient visits.
Data Element Scope: This value set may use a model element related to Medication.
Inclusion Criteria: Includes concepts that represent outpatient encounters for annual visit, preventive evaluation, follow-up, or periodic re-evaluations.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Outpatient Encounters for Preventive Care value set (2.16.840.1.113883.3.526.3.1576)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for palliative care services.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for admission and management for palliative care services.
Exclusion Criteria: Excludes concepts that represent encounters for hospice and a referral to palliative care.

Constrained to codes in the Encounter, Performed: Palliative Care Encounter value set (2.16.840.1.113883.3.464.1003.101.12.1090)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for preventive care.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for comprehensive preventive medicine reevaluation and management of an established patient 18 years of age or over.
Exclusion Criteria: Excludes initial visits for new patients.

Constrained to codes in the Encounter, Performed: Preventive Care Services Established Office Visit, 18 and Up value set (2.16.840.1.113883.3.464.1003.101.12.1025)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for individual counseling services.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for counseling, anticipatory guidance, and risk factor reduction interventions.
Exclusion Criteria: Excludes concepts that represent an encounter for services performed in the emergency department, including critical care and observation services.

Constrained to codes in the Encounter, Performed: Preventive Care Services Individual Counseling value set (2.16.840.1.113883.3.464.1003.101.12.1026)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for encounters for preventive care.
Data Element Scope: This value set may use a model element related to Encounter.
Inclusion Criteria: Includes concepts that represent an encounter for comprehensive preventive medicine reevaluation and management of a new patient 18 years or over.
Exclusion Criteria: Excludes visits for established patients.

Constrained to codes in the Encounter, Performed: Preventive Care Services Initial Office Visit, 18 and Up value set (2.16.840.1.113883.3.464.1003.101.12.1023)

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Direct Reference Code

Constrained to 'Unlisted preventive medicine service' CPT code

QDM Datatype and Definition

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.6 addresses that concept using the diagnosis rank=1.

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of interventions to identify patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use a model element related to Procedure or Intervention.
Inclusion Criteria: Includes concepts that represent a procedure or intervention for hospice care.
Exclusion Criteria: Excludes concepts that represent palliative care or comfort measures.

Constrained to codes in the Intervention, Order: Hospice Care Ambulatory value set (2.16.840.1.113883.3.526.3.1584)

QDM Datatype and Definition

"Intervention, Order"

Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set.

Timing: The time the order is signed; author dateTime.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of interventions to identify patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use a model element related to Procedure or Intervention.
Inclusion Criteria: Includes concepts that represent a procedure or intervention for hospice care.
Exclusion Criteria: Excludes concepts that represent palliative care or comfort measures.

Constrained to codes in the Intervention, Performed: Hospice Care Ambulatory value set (2.16.840.1.113883.3.526.3.1584)

QDM Datatype and Definition

"Intervention, Performed"

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the intervention is performed when the intervention occurs at a single point in time.
  • relevantPeriod references a start and stop time for an intervention that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the intervention begins.
    • stopTime - The time the intervention ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes:

  • Timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for palliative care interventions.
Data Element Scope: This value set may use a model element related to Intervention.
Inclusion Criteria: Includes concepts that represent palliative care interventions, including procedures and regime/therapy provided as part of palliative care services.
Exclusion Criteria: Excludes concepts that represent an intervention for hospice.

Constrained to codes in the Intervention, Performed: Palliative Care Intervention value set (2.16.840.1.113883.3.464.1003.198.12.1135)

QDM Datatype and Definition

"Intervention, Performed"

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the intervention is performed when the intervention occurs at a single point in time.
  • relevantPeriod references a start and stop time for an intervention that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the intervention begins.
    • stopTime - The time the intervention ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes:

  • Timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for laboratory tests commonly used for low-density lipoproteins (LDL) cholesterol measurement.
Data Element Scope: This value set may use a model element related to Laboratory Test.
Inclusion Criteria: Includes concepts that represent a laboratory test measuring low-density lipoprotein cholesterol (LDL-C) using the specimen type of serum or plasma based on a measurement scale of mass per volume.
Exclusion Criteria: No exclusions.

Constrained to codes in the Laboratory Test, Performed: LDL Cholesterol value set (2.16.840.1.113883.3.526.3.1573)

QDM Datatype and Definition

"Laboratory Test, Performed"

Data elements that meet criteria using this datatype should document the laboratory test indicated by the QDM category and its corresponding value set was performed.

Timing:

  • relevant dateTime references the time the laboratory test is performed when the laboratory test occurs at a single point in time.
  • relevantPeriod references a start and stop time for a laboratory test that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the laboratory test begins.
    • stopTime - The time the laboratory test ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Examples:

  • Initiation of a venipuncture for a fasting blood glucose to the time venipuncture for the fasting blood glucose is completed – use relevant dateTime to reference this single point in time for many specimen collections
  • Initiation of a 24-hour urine collection for measured creatinine clearance until completion of the 24-hour urine collection – use relevantPeriod to reference the start to stop time for this event.

Notes:

  • The time that the result report is available is a separate attribute than the time of the study (specimen collection).
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for medications that are high intensity statins as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Data Element Scope: This value set may use a model element related to Medication.
Inclusion Criteria: Includes concepts that represent a medication for high intensity statin therapy as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Exclusion Criteria: Excludes concepts that represent any other intensity of statin therapy.

Constrained to codes in the Medication, Active: High Intensity Statin Therapy value set (2.16.840.1.113883.3.526.3.1572)

QDM Datatype and Definition

"Medication, Active"

Data elements that meet criteria using this datatype should document that the medication indicated by the QDM category and its corresponding value set is being taken by the patient. Keep in mind that when this datatype is used with timing relationships, the criterion is looking for a medication being taken for the time frame indicated by the timing relationships.

Timing:

  • relevant dateTime references the time the medication is active on the medication record if it was given or taken at a single point in time.
  • relevantPeriod references a start and stop time for an active medication on the medication record that is given or taken over a time interval:
  • The relevantPeriod addresses:
    • startTime = when the medication is first known to be used (generally the time of entry on the medication list).
    • stopTime = when the medication is no longer active.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of low intensity statin medications as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Data Element Scope: This value set may use a model element related to Medication.
Inclusion Criteria: Includes concepts that represent a medication for low intensity statin therapy as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Exclusion Criteria: Excludes concepts that represent any other intensity of statin therapy.

Constrained to codes in the Medication, Active: Low Intensity Statin Therapy value set (2.16.840.1.113883.3.526.3.1574)

QDM Datatype and Definition

"Medication, Active"

Data elements that meet criteria using this datatype should document that the medication indicated by the QDM category and its corresponding value set is being taken by the patient. Keep in mind that when this datatype is used with timing relationships, the criterion is looking for a medication being taken for the time frame indicated by the timing relationships.

Timing:

  • relevant dateTime references the time the medication is active on the medication record if it was given or taken at a single point in time.
  • relevantPeriod references a start and stop time for an active medication on the medication record that is given or taken over a time interval:
  • The relevantPeriod addresses:
    • startTime = when the medication is first known to be used (generally the time of entry on the medication list).
    • stopTime = when the medication is no longer active.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent moderate intensity statin medications as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Data Element Scope: This value set may use a model element related to Medication.
Inclusion Criteria: Includes concepts that represent a medication for moderate intensity statin therapy as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Exclusion Criteria: Excludes concepts that represent any other intensity of statin therapy.

Constrained to codes in the Medication, Active: Moderate Intensity Statin Therapy value set (2.16.840.1.113883.3.526.3.1575)

QDM Datatype and Definition

"Medication, Active"

Data elements that meet criteria using this datatype should document that the medication indicated by the QDM category and its corresponding value set is being taken by the patient. Keep in mind that when this datatype is used with timing relationships, the criterion is looking for a medication being taken for the time frame indicated by the timing relationships.

Timing:

  • relevant dateTime references the time the medication is active on the medication record if it was given or taken at a single point in time.
  • relevantPeriod references a start and stop time for an active medication on the medication record that is given or taken over a time interval:
  • The relevantPeriod addresses:
    • startTime = when the medication is first known to be used (generally the time of entry on the medication list).
    • stopTime = when the medication is no longer active.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for medications that are high intensity statins as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Data Element Scope: This value set may use a model element related to Medication.
Inclusion Criteria: Includes concepts that represent a medication for high intensity statin therapy as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Exclusion Criteria: Excludes concepts that represent any other intensity of statin therapy.

Constrained to codes in the Medication, Order: High Intensity Statin Therapy value set (2.16.840.1.113883.3.526.3.1572)

QDM Datatype and Definition

"Medication, Order"

Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set.

Timing:

  • relevantPeriod addresses the time referenced in the dosage instruction indicating when the medication administration should start and end.
  • author dateTime references the date and time the medication order (prescription) is authored.

Notes:

  • The medication order (prescription) is unlikely to indicate a relevantPeriod, the time period for which the ordered supply is to be administered/taken including all refills. Therefore, to determine the number of days covered by a single dispensing event, use the daysSupplied attribute and the relevant dateTime of the event to determine when the ordered medication will run out. If daysSupplied is not available, derive it from the supply (quantity of medication ordered) divided by the dosage (amount of medication to be taken at a single administration) times the frequency (number of units per time period – e.g., per day):
    daysSupplied = supply / (dosage x frequency)
    And multiply the daysSupplied per dispensing event multiplied by one plus the number of refills to determine the total daysSupplied ordered.
    daysSupplied x (1 + #refills)
    Starting with the relevant dateTime add the total daysSupplied (including refills) to determine when the ordered medication quantity will run out.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Refer to Special Cases in Section 5.7 for scenarios to consider in calculating cumulative medication duration.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of low intensity statin medications as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Data Element Scope: This value set may use a model element related to Medication.
Inclusion Criteria: Includes concepts that represent a medication for low intensity statin therapy as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Exclusion Criteria: Excludes concepts that represent any other intensity of statin therapy.

Constrained to codes in the Medication, Order: Low Intensity Statin Therapy value set (2.16.840.1.113883.3.526.3.1574)

QDM Datatype and Definition

"Medication, Order"

Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set.

Timing:

  • relevantPeriod addresses the time referenced in the dosage instruction indicating when the medication administration should start and end.
  • author dateTime references the date and time the medication order (prescription) is authored.

Notes:

  • The medication order (prescription) is unlikely to indicate a relevantPeriod, the time period for which the ordered supply is to be administered/taken including all refills. Therefore, to determine the number of days covered by a single dispensing event, use the daysSupplied attribute and the relevant dateTime of the event to determine when the ordered medication will run out. If daysSupplied is not available, derive it from the supply (quantity of medication ordered) divided by the dosage (amount of medication to be taken at a single administration) times the frequency (number of units per time period – e.g., per day):
    daysSupplied = supply / (dosage x frequency)
    And multiply the daysSupplied per dispensing event multiplied by one plus the number of refills to determine the total daysSupplied ordered.
    daysSupplied x (1 + #refills)
    Starting with the relevant dateTime add the total daysSupplied (including refills) to determine when the ordered medication quantity will run out.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Refer to Special Cases in Section 5.7 for scenarios to consider in calculating cumulative medication duration.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent moderate intensity statin medications as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Data Element Scope: This value set may use a model element related to Medication.
Inclusion Criteria: Includes concepts that represent a medication for moderate intensity statin therapy as defined by the 2013 American College of Cardiology (ACC) and the American Heart Association (AHA) guideline.
Exclusion Criteria: Excludes concepts that represent any other intensity of statin therapy.

Constrained to codes in the Medication, Order: Moderate Intensity Statin Therapy value set (2.16.840.1.113883.3.526.3.1575)

QDM Datatype and Definition

"Medication, Order"

Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set.

Timing:

  • relevantPeriod addresses the time referenced in the dosage instruction indicating when the medication administration should start and end.
  • author dateTime references the date and time the medication order (prescription) is authored.

Notes:

  • The medication order (prescription) is unlikely to indicate a relevantPeriod, the time period for which the ordered supply is to be administered/taken including all refills. Therefore, to determine the number of days covered by a single dispensing event, use the daysSupplied attribute and the relevant dateTime of the event to determine when the ordered medication will run out. If daysSupplied is not available, derive it from the supply (quantity of medication ordered) divided by the dosage (amount of medication to be taken at a single administration) times the frequency (number of units per time period – e.g., per day):
    daysSupplied = supply / (dosage x frequency)
    And multiply the daysSupplied per dispensing event multiplied by one plus the number of refills to determine the total daysSupplied ordered.
    daysSupplied x (1 + #refills)
    Starting with the relevant dateTime add the total daysSupplied (including refills) to determine when the ordered medication quantity will run out.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Refer to Special Cases in Section 5.7 for scenarios to consider in calculating cumulative medication duration.

Value Set Description from VSAC
Clinical Focus: n/a Data Element Scope: n/a Inclusion Criteria: n/a Exclusion Criteria: n/a

Constrained to codes in the Patient Characteristic, Ethnicity: Ethnicity value set (2.16.840.1.114222.4.11.837)

QDM Datatype and Definition

"Patient Characteristic, Ethnicity"

Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set.

Timing: Ethnicity does not have a specific timing. Measures using "Patient Characteristic, Ethnicity" should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: Categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system
Data Element Scope: @code in CCDA r2.1 template Planned Coverage [act: identifier urn:oid:2.16.840.1.113883.10.20.22.4.129 (open)] DYNAMIC
Inclusion Criteria: All codes in the code system
Exclusion Criteria: none

Constrained to codes in the Patient Characteristic, Payer: Payer value set (2.16.840.1.114222.4.11.3591)

QDM Datatype and Definition

"Patient Characteristic, Payer"

Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set.

Timing:

The relevantPeriod addresses:

  • startTime – the first day of insurance coverage with the referenced payer.
  • stopTime – the last day of insurance coverage with the referenced payer.
Value Set Description from VSAC
Clinical Focus: n/a Data Element Scope: n/a Inclusion Criteria: n/a Exclusion Criteria: n/a

Constrained to codes in the Patient Characteristic, Race: Race value set (2.16.840.1.114222.4.11.836)

QDM Datatype and Definition

"Patient Characteristic, Race"

Data elements that meet criteria using this datatype should document the patient’s race.

Timing: Race does not have a specific timing. Measures using "Patient Characteristic, Race" should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: Gender identity restricted to only Male and Female used in administrative situations requiring a restriction to these two categories.
Data Element Scope: Gender
Inclusion Criteria: Male and Female only.
Exclusion Criteria: Any gender identity that is not male or female.

Constrained to codes in the Patient Characteristic, Sex: ONC Administrative Sex value set (2.16.840.1.113762.1.4.1)

QDM Datatype and Definition

"Patient Characteristic, Sex"

Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set.

Timing: Birth (administrative) sex does not have a specific timing.

Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts of coronary artery bypass graft (CABG) procedures.
Data Element Scope: This value set may use a model element related to Procedure.
Inclusion Criteria: Includes concepts that represent a procedure for coronary artery bypass graft (CABG) surgery.
Exclusion Criteria: Excludes concepts that represent a coronary artery bypass graft (CABG) performed using a scope.

Constrained to codes in the Procedure, Performed: CABG Surgeries value set (2.16.840.1.113883.3.666.5.694)

QDM Datatype and Definition

"Procedure, Performed"

Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the procedure is performed when the procedure occurs at a single point in time.
  • relevantPeriod references a start and stop time for a procedure that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the procedure begins.
    • stopTime - The time the procedure ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes: 

  • Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request.
  • The incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • See section 6.4 for guidance about differentiating between successful and unsuccessful procedures.
Value Set Description from VSAC
Clinical Focus: CABG and PCI procedures
Data Element Scope: CABG and PCI procedures
Inclusion Criteria: Codes from 2018_Registry_SingleSource_v2.2
Exclusion Criteria: None

Constrained to codes in the Procedure, Performed: CABG, PCI Procedure value set (2.16.840.1.113762.1.4.1138.566)

QDM Datatype and Definition

"Procedure, Performed"

Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the procedure is performed when the procedure occurs at a single point in time.
  • relevantPeriod references a start and stop time for a procedure that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the procedure begins.
    • stopTime - The time the procedure ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes: 

  • Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request.
  • The incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • See section 6.4 for guidance about differentiating between successful and unsuccessful procedures.
Value Set Description from VSAC
Clinical Focus: The purpose of this value set is to represent concepts for procedures for carotid surgical intervention.
Data Element Scope: This value set may use a model element related to Procedure.
Inclusion Criteria: Includes concepts that represent a procedure carotid intervention surgery.
Exclusion Criteria: No exclusions.

Constrained to codes in the Procedure, Performed: Carotid Intervention value set (2.16.840.1.113883.3.117.1.7.1.204)

QDM Datatype and Definition

"Procedure, Performed"

Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the procedure is performed when the procedure occurs at a single point in time.
  • relevantPeriod references a start and stop time for a procedure that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the procedure begins.
    • stopTime - The time the procedure ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes: 

  • Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request.
  • The incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • See section 6.4 for guidance about differentiating between successful and unsuccessful procedures.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent procedures used to define percutaneous coronary intervention (PCI).
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Procedure, Performed. The intent of this data element is to identify patients who had percutaneous coronary intervention (PCI) during an episode of acute myocardial infarction.
Inclusion Criteria: Includes only relevant concepts associated with identifying patients receiving percutaneous coronary intervention (PCI). This is a grouping of ICD-10-PCS and SNOMED CT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Procedure, Performed: PCI value set (2.16.840.1.113762.1.4.1045.67)

QDM Datatype and Definition

"Procedure, Performed"

Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the procedure is performed when the procedure occurs at a single point in time.
  • relevantPeriod references a start and stop time for a procedure that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the procedure begins.
    • stopTime - The time the procedure ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes: 

  • Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request.
  • The incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • See section 6.4 for guidance about differentiating between successful and unsuccessful procedures.