Back to top
Top
DERep Home Page

Initiation and Engagement of Alcohol and Other Drug Dependence Treatment

CMS Measure ID: CMS137v9    Performance/Reporting Period: 2021    Version: 9    NQF Number: Not Applicable
Description:

Percentage of patients 13 years of age and older with a new episode of alcohol or other drug abuse or (AOD) dependence who received the following. Two rates are reported.

a. Percentage of patients who initiated treatment including either an intervention or medication for the treatment of AOD abuse or dependence within 14 days of the diagnosis

b. Percentage of patients who engaged in ongoing treatment including two additional interventions or a medication for the treatment of AOD abuse or dependence within 34 days of the initiation visit. For patients who initiated treatment with a medication, at least one of the two engagement events must be a treatment intervention.

Data Elements and coded QDM Attributes contained within the eCQM

+ Expand all

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent alcohol and drug dependence.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Diagnosis.
Inclusion Criteria: Includes only relevant concepts associated with alcohol and drug abuse and dependence. This is a grouping of ICD-10CM and SNOMED CT codes.
Exclusion Criteria: Excludes codes related to alcohol and drug use.

Constrained to codes in the Diagnosis: Alcohol and Drug Dependence value set (2.16.840.1.113883.3.464.1003.106.12.1001)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The prevalencePeriod references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent detoxification visits.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying alcohol and drug detoxification. This is a grouping of SNOMED CT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Detoxification Visit value set (2.16.840.1.113883.3.464.1003.101.12.1059)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent inpatient hospital same day discharge services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying observation or inpatient care for the evaluation and management of a patient that results in discharge on the same date of admission. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Discharge Services - Hospital Inpatient Same Day Discharge value set (2.16.840.1.113883.3.464.1003.101.12.1006)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent inpatient hospital discharge services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying hospital discharge day management. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Discharge Services - Hospital Inpatient value set (2.16.840.1.113883.3.464.1003.101.12.1007)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had an interaction with a member of their medical care team in the emergency department.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with care provided to new and established patients in the emergency department. This is a value set grouping that includes CPT and SNOMED CT codes.
Exclusion Criteria: Excludes services not performed in the emergency department, including critical care and observation services.

Constrained to codes in the Encounter, Performed: Emergency Department Visit 1 value set (2.16.840.1.113883.3.464.1003.101.12.1010)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent the most common inpatient encounter types.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter. The intent of this data element is to identify patients who have had an inpatient encounter.
Inclusion Criteria: Includes only relevant concepts associated with SNOMED CT codes representing inpatient encounter.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Encounter Inpatient value set (2.16.840.1.113883.3.666.5.307)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent inpatient hospital visits.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with initial hospital care for the evaluation and management of a patient. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Hospital Inpatient Visit - Initial value set (2.16.840.1.113883.3.464.1003.101.12.1004)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent initial inpatient hospital observation care.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with initial observation care for the evaluation and management of a patient. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Hospital Observation Care - Initial value set (2.16.840.1.113883.3.464.1003.101.12.1002)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.

["Encounter, Performed": "Office Visit"]

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had an office or other outpatient visit.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity. This is a grouping value set of CPT codes.
Exclusion Criteria: Excludes non-office visits, including telehealth services.

Constrained to codes in the Encounter, Performed: Office Visit value set (2.16.840.1.113883.3.464.1003.101.12.1001)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent telehealth services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying telehealth services, including telephone and online evaluation and management services.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Telehealth Services value set (2.16.840.1.113883.3.464.1003.101.12.1031)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

The "Encounter, Performed" participant references the primary participant.

Previous versions of QDM included an attribute principal diagnosis, defined as the condition that, after study, was determined to be the principal cause of the admission. QDM version 5.5 addresses that concept using the diagnosis rank=1.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here. 

Timing:

  • The relevantPeriod addresses:
    • startTime - The time the encounter began (admission time).
    • stopTime - The time the encounter ended (discharge time).
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criteria.

Notes:

  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
  • The locationPeriod is an attribute of the attribute facility location that addresses:
    • startTime - the time the patient arrived at the location. The time the encounter began (admission time).
    • stopTime - the time the patient departed from the location.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Procedure, Order or Intervention, Order. The intent of this value set is to identify all patients receiving hospice care outside of a hospital or long term care facility.
Inclusion Criteria: Includes only relevant concepts associated with hospice care concepts.
Exclusion Criteria: Excludes concepts for palliative care or comfort measures.

Constrained to codes in the Intervention, Order: Hospice care ambulatory value set (2.16.840.1.113762.1.4.1108.15)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Intervention, Order"

Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set.

Timing: The time the order is signed; author dateTime.

Note: negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent treatment for alcohol and drug dependence.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with assessment, management, and both psychosocial and pharmacological treatment of alcohol and drug dependence. This is a grouping of SNOMED CT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Intervention, Performed: Alcohol and Drug Dependence Treatment value set (2.16.840.1.113883.3.464.1003.106.12.1005)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Intervention, Performed"

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the intervention is performed when the intervention occurs at a single point in time.
  • relevantPeriod references a start and stop time for an intervention that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the intervention begins.
    • stopTime - The time the intervention ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes:

  • Timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
     
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Procedure, Order or Intervention, Order. The intent of this value set is to identify all patients receiving hospice care outside of a hospital or long term care facility.
Inclusion Criteria: Includes only relevant concepts associated with hospice care concepts.
Exclusion Criteria: Excludes concepts for palliative care or comfort measures.

Constrained to codes in the Intervention, Performed: Hospice care ambulatory value set (2.16.840.1.113762.1.4.1108.15)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Intervention, Performed"

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the intervention is performed when the intervention occurs at a single point in time.
  • relevantPeriod references a start and stop time for an intervention that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the intervention begins.
    • stopTime - The time the intervention ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes:

  • Timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
     
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent visits for psychotherapy.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with visits for individual psychotherapy services.
Exclusion Criteria: Excludes group psychotherapy or family psychotherapy.

Constrained to codes in the Intervention, Performed: Psych Visit - Psychotherapy value set (2.16.840.1.113883.3.526.3.1496)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Intervention, Performed"

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing:

  • relevant dateTime references the time the intervention is performed when the intervention occurs at a single point in time.
  • relevantPeriod references a start and stop time for an intervention that occurs over a time interval. relevantPeriod addresses:
    • startTime - The time the intervention begins.
    • stopTime - The time the intervention ends.
  • author dateTime references the time the action was recorded.
  • Refer to the eCQM expression to determine allowable timings to meet measure criterion.

Notes:

  • Timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.
     
Value Set Description from VSAC
Clinical Focus: This value set contains concepts to represent treatment of substance abuse with an opioid antagonist medication.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated treatment of substance abuse with an opiate antagonist medication. This is a grouping of ICD10PCS codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Medication, Order: Opiate Antagonists value set (2.16.840.1.113883.3.464.1003.198.12.1132)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Medication, Order"

Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set.

Timing:

  • relevantPeriod addresses the time referenced in the dosage instruction indicating when the medication administration should start and end.
  • In the initial publication of QDM 5.5, relevantPeriod referenced the validity period, i.e., the time period for which the ordered supply is authorized by the prescription authorizing the dispensing event.
  • For clarification, see Appendix 6.4 with additional guidance for referencing relevantPeriod updating the definition for Medication, Order, "Medication Dispensed", and "Substance, Order".
  • author dateTime references the date and time the medication order (prescription) or the reason for not ordering the medication (i.e., negationRationale) is authored.

Notes:

  • When calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the relevantPeriod start and stop times multiplied by (1 + the number of refills).
  • negation rationale indicates a one-time documentation of a reason an activity is not performed. Negation of QDM datatype-related actions for a reason always use the author dateTime attribute to reference timing and must not use relevantPeriod.

Refer to Special Cases in Appendix A (Section 5.7) for scenarios to consider in calculating cumulative medication duration.

Direct Reference Code

Constrained to 'Birth date' LOINC code

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Patient Characteristic, Birthdate"

The "Patient Characteristic Birthdate" should document the patient’s date of birth.

Timing: The "Patient Characteristic, Birthdate" is a single point in time representing the date and time of birth. It does not have a start and stop time.

Note: "Patient Characteristic Birthdate" is fixed to LOINC code 21112-8 (Birth date) and therefore cannot be further qualified with a value set.

Value Set Description from VSAC
Clinical Focus: n/a Data Element Scope: n/a Inclusion Criteria: n/a Exclusion Criteria: n/a

Constrained to codes in the Patient Characteristic, Ethnicity: Ethnicity value set (2.16.840.1.114222.4.11.837)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Patient Characteristic, Ethnicity"

Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set.

Timing: Ethnicity does not have a specific timing. Measures using "Patient Characteristic, Ethnicity" should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: Categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system
Data Element Scope: @code in CCDA r2.1 template Planned Coverage [act: identifier urn:oid:2.16.840.1.113883.10.20.22.4.129 (open)] DYNAMIC
Inclusion Criteria: All codes in the code system
Exclusion Criteria: none

Constrained to codes in the Patient Characteristic, Payer: Payer value set (2.16.840.1.114222.4.11.3591)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Patient Characteristic, Payer"

Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set.

Timing:

The relevantPeriod addresses:

  • startTime – the first day of insurance coverage with the referenced payer.
  • stopTime – the last day of insurance coverage with the referenced payer.
Value Set Description from VSAC
Clinical Focus: n/a Data Element Scope: n/a Inclusion Criteria: n/a Exclusion Criteria: n/a

Constrained to codes in the Patient Characteristic, Race: Race value set (2.16.840.1.114222.4.11.836)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Patient Characteristic, Race"

Data elements that meet criteria using this datatype should document the patient’s race.

Timing: Race does not have a specific timing. Measures using "Patient Characteristic, Race" should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: Gender identity restricted to only Male and Female used in administrative situations requiring a restriction to these two categories.
Data Element Scope: Gender
Inclusion Criteria: Male and Female only.
Exclusion Criteria: Any gender identity that is not male or female.

Constrained to codes in the Patient Characteristic, Sex: ONC Administrative Sex value set (2.16.840.1.113762.1.4.1)

QDM Datatype and Definition (QDM Version 5.5 Guidance Update)

"Patient Characteristic, Sex"

Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set.

Timing: Birth (administrative) sex does not have a specific timing.