Back to top
Top
CMS Measure ID: CMS771v1    Performance/Reporting Period: 2020    Version: 1    NQF Number: Not Applicable
Description:

Percentage of patients with an office visit within the measurement period and with a new diagnosis of clinically significant Benign Prostatic Hyperplasia who have International Prostate Symptoms Score (IPSS) or American Urological Association (AUA) Symptom Index (SI) documented at time of diagnosis and again 6-12 months later with an improvement of 3 points

Data Elements and coded QDM Attributes contained within the eCQM

+ Expand all

Direct Reference Code

Constrained to 'American Urological Association Symptom Index [AUASI]' LOINC code

QDM Datatype and Definition (QDM Version 5.4)

"Assessment, Performed"

Data elements that meet criteria using this datatype should document completion of the assessment indicated by the QDM category and its corresponding value set.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here.

Timing: The time the assessment is completed; Author dateTime.

Direct Reference Code

Constrained to 'If you were to spend the rest of your life with your urinary condition just the way it is now, how would you feel about that [IPSS]' LOINC code

QDM Datatype and Definition (QDM Version 5.4)

"Assessment, Performed"

Data elements that meet criteria using this datatype should document completion of the assessment indicated by the QDM category and its corresponding value set.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here.

Timing: The time the assessment is completed; Author dateTime.

Direct Reference Code

Constrained to 'International Prostate Symptom Score [IPSS]' LOINC code

QDM Datatype and Definition (QDM Version 5.4)

"Assessment, Performed"

Data elements that meet criteria using this datatype should document completion of the assessment indicated by the QDM category and its corresponding value set.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here.

Timing: The time the assessment is completed; Author dateTime.

Direct Reference Code

Constrained to 'Benign prostatic hyperplasia with lower urinary tract symptoms' ICD10CM code

QDM Datatype and Definition (QDM Version 5.4)

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The Prevalence Period references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: This set of values focuses on morbid obesity codes.
Data Element Scope: The intent of this data element is to identify morbid obesity and BMI's reflective of morbid obesity.
Inclusion Criteria: Morbid obesity
Exclusion Criteria: None

Constrained to codes in the Diagnosis: Morbid Obesity value set (2.16.840.1.113762.1.4.1164.65)

QDM Datatype and Definition (QDM Version 5.4)

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The Prevalence Period references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: This set of values focuses on urinary retention related to drugs or other causes.
Data Element Scope: The intent of this data element is to define urinary retention.
Inclusion Criteria: Urinary retention related to drugs or other causes
Exclusion Criteria: None

Constrained to codes in the Diagnosis: Urinary retention value set (2.16.840.1.113762.1.4.1164.52)

QDM Datatype and Definition (QDM Version 5.4)

"Diagnosis"

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The Prevalence Period references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: This set of values focuses on hospital care, specifically for urology care.
Data Element Scope: The intent of this data element is to define hospital CPT services used for urology care.
Inclusion Criteria: Included CPT codes
Exclusion Criteria: None

Constrained to codes in the Encounter, Performed: Hospital Services for urology care value set (2.16.840.1.113762.1.4.1164.64)

QDM Datatype and Definition (QDM Version 5.4)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime -the time the patient arrived at the location;
  • stopTime -the time the patient departed from the location
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had an office or other outpatient visit.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity. This is a grouping value set of CPT codes.
Exclusion Criteria: Excludes non-office visits, including telehealth services.

Constrained to codes in the Encounter, Performed: Office Visit 1 value set (2.16.840.1.113883.3.464.1003.101.12.1001)

QDM Datatype and Definition (QDM Version 5.4)

"Encounter, Performed"

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

A QDM Known Issue has been identified related to this datatype. To see this QDM known Issue, please click here.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime -the time the patient arrived at the location;
  • stopTime -the time the patient departed from the location
Value Set Description from VSAC
Clinical Focus: n/a Data Element Scope: n/a Inclusion Criteria: n/a Exclusion Criteria: n/a

Constrained to codes in the Patient Characteristic, Ethnicity: Ethnicity value set (2.16.840.1.114222.4.11.837)

QDM Datatype and Definition (QDM Version 5.4)

"Patient Characteristic Ethnicity"

Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set.

Timing: Ethnicity does not have a specific timing. Measures using Patient Characteristic, Ethnicity should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: Categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system
Data Element Scope: @code in CCDA r2.1 template Planned Coverage [act: identifier urn:oid:2.16.840.1.113883.10.20.22.4.129 (open)] DYNAMIC
Inclusion Criteria: All codes in the code system
Exclusion Criteria: none

Constrained to codes in the Patient Characteristic, Payer: Payer value set (2.16.840.1.114222.4.11.3591)

QDM Datatype and Definition (QDM Version 5.4)

"Patient Characteristic Payer"

Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set.

Timing: The Relevant Period addresses:

  • startTime – the first day of insurance coverage with the referenced payer
  • stopTime – the last day of insurance coverage with the referenced payer

 

Value Set Description from VSAC
Clinical Focus: n/a Data Element Scope: n/a Inclusion Criteria: n/a Exclusion Criteria: n/a

Constrained to codes in the Patient Characteristic, Race: Race value set (2.16.840.1.114222.4.11.836)

QDM Datatype and Definition (QDM Version 5.4)

"Patient Characteristic Race"

Data elements that meet criteria using this datatype should document the patient’s race.

Timing: Race does not have a specific timing. Measures using Patient Characteristic, Race should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: Gender identity restricted to only Male and Female used in administrative situations requiring a restriction to these two categories.
Data Element Scope: Gender
Inclusion Criteria: Male and Female only.
Exclusion Criteria: Any gender identity that is not male or female.

Constrained to codes in the Patient Characteristic, Sex: ONC Administrative Sex value set (2.16.840.1.113762.1.4.1)

QDM Datatype and Definition (QDM Version 5.4)

"Patient Characteristic Sex"

Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set.

Timing: Birth (administrative) sex does not have a specific timing.

Direct Reference Code

Constrained to 'Estimated BMI greater than 40' LOINC code

QDM Datatype and Definition (QDM Version 5.4)

"Physical Exam, Performed"

Data elements that meet criteria using this datatype should document the completion of the physical exam indicated by the QDM category and its corresponding value set.

Timing: The Relevant Period addresses:

  • startTime – the time the physical examination activity begins
  • stopTime – the time the physical examination activity ends

NOTE - timing refers to a single instance of a physical examination activity. If a measure seeks to evaluate multiple physical examination activities over a period of time, the measure developer should use CQL logic to represent the query request.