Back to top
Top
CMS Measure ID:
Version:
7
NQF Number:
4
Performance/Reporting Period
2019
Description:

Percentage of patients 13 years of age and older with a new episode of alcohol or other drug abuse or (AOD) dependence who received the following. Two rates are reported.

a. Percentage of patients who initiated treatment within 14 days of the diagnosis.

b. Percentage of patients who initiated treatment and who had two or more additional services with an AOD diagnosis within 30 days of the initiation visit.

Data Elements contained within the eCQM + Expand all

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent alcohol and drug dependence.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Diagnosis.
Inclusion Criteria: Includes only relevant concepts associated with alcohol and drug abuse and dependence. This is a grouping of ICD-10CM and SNOMED CT codes.
Exclusion Criteria: Excludes codes related to alcohol and drug use.

Constrained to codes in the Diagnosis: Alcohol and Drug Dependence value set (2.16.840.1.113883.3.464.1003.106.12.1001)

QDM Datatype and Definition (QDM Version 5.3)

Diagnosis

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The Prevalence Period references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent treatment for alcohol and drug dependence.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with assessment, management, and both psychosocial and pharmacological treatment of alcohol and drug dependence. This is a grouping of SNOMED CT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Alcohol and Drug Dependence Treatment value set (2.16.840.1.113883.3.464.1003.106.12.1005)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent detoxification visits.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying alcohol and drug detoxification. This is a grouping of SNOMED CT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Detoxification Visit value set (2.16.840.1.113883.3.464.1003.101.12.1059)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent inpatient hospital discharge services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying hospital discharge day management. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Discharge Services - Hospital Inpatient value set (2.16.840.1.113883.3.464.1003.101.12.1007)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent inpatient hospital same day discharge services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying observation or inpatient care for the evaluation and management of a patient that results in discharge on the same date of admission. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Discharge Services - Hospital Inpatient Same Day Discharge value set (2.16.840.1.113883.3.464.1003.101.12.1006)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had an interaction with a member of their medical care team in the emergency department.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with care provided to new and established patients in the emergency department. This is a value set grouping that includes CPT and SNOMED CT codes.
Exclusion Criteria: Excludes services not performed in the emergency department, including critical care and observation services.

Constrained to codes in the Encounter, Performed: Emergency Department Visit 1 value set (2.16.840.1.113883.3.464.1003.101.12.1010)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent the most common inpatient encounter types.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter. The intent of this data element is to identify patients who have had an inpatient encounter.
Inclusion Criteria: Includes only relevant concepts associated with SNOMED CT codes representing inpatient encounter.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Encounter Inpatient value set (2.16.840.1.113883.3.666.5.307)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent inpatient hospital visits.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with initial hospital care for the evaluation and management of a patient. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Hospital Inpatient Visit - Initial value set (2.16.840.1.113883.3.464.1003.101.12.1004)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent initial inpatient hospital observation care.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with initial observation care for the evaluation and management of a patient. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Hospital Observation Care - Initial value set (2.16.840.1.113883.3.464.1003.101.12.1002)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had an office or other outpatient visit.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity. This is a grouping value set of CPT codes.
Exclusion Criteria: Excludes non-office visits, including telehealth services.

Constrained to codes in the Encounter, Performed: Office Visit 1 value set (2.16.840.1.113883.3.464.1003.101.12.1001)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent visits for psychotherapy.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with visits for individual psychotherapy services.
Exclusion Criteria: Excludes group psychotherapy or family psychotherapy.

Constrained to codes in the Encounter, Performed: Psych Visit - Psychotherapy value set (2.16.840.1.113883.3.526.3.1496)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Procedure, Order or Intervention, Order. The intent of this value set is to identify all patients receiving hospice care outside of a hospital or long term care facility.
Inclusion Criteria: Includes only relevant concepts associated with hospice care concepts.
Exclusion Criteria: Excludes concepts for palliative care or comfort measures.

Constrained to codes in the Intervention, Order: Hospice care ambulatory value set (2.16.840.1.113762.1.4.1108.15)

QDM Datatype and Definition (QDM Version 5.3)

Intervention, Order

Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set.

Timing: The time the order is signed; Author dateTime

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Procedure, Order or Intervention, Order. The intent of this value set is to identify all patients receiving hospice care outside of a hospital or long term care facility.
Inclusion Criteria: Includes only relevant concepts associated with hospice care concepts.
Exclusion Criteria: Excludes concepts for palliative care or comfort measures.

Constrained to codes in the Intervention, Performed: Hospice care ambulatory value set (2.16.840.1.113762.1.4.1108.15)

QDM Datatype and Definition (QDM Version 5.3)

Intervention, Performed

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing: The Relevant Period addresses:

  • startTime – the time the intervention begins
  • stopTime – the time the intervention ends

NOTE - timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent whether the patient is Hispanic or not; ethnicity category defined by the Centers for Disease Control and Prevention and National Center for Health Statistics.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Ethnicity.
Inclusion Criteria: Includes only relevant concepts associated with ethnicity defined as Hispanic or Latino, or Not Hispanic or Latino.
Exclusion Criteria: No exclusions.

Constrained to codes in the Patient Characteristic Ethnicity: Ethnicity value set (2.16.840.1.114222.4.11.837)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Ethnicity

Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set.

Timing: Ethnicity does not have a specific timing. Measures using Patient Characteristic, Ethnicity should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Payer.
Inclusion Criteria: Includes only relevant concepts associated with payer codes in the code system.
Exclusion Criteria: No exclusions.

Constrained to codes in the Patient Characteristic Payer: Payer value set (2.16.840.1.114222.4.11.3591)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Payer

Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set.

Timing: The Relevant Period addresses:

  • startTime – the first day of insurance coverage with the referenced payer
  • stopTime – the last day of insurance coverage with the referenced payer

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent the general race category reported by the patient - subject may have more than one; defined by the Centers for Disease Control and Prevention and National Center for Health Statistics.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Race.
Inclusion Criteria: Includes only relevant concepts associated with the following race categories: American Indian or Alaska Native, Asian, Black or African American, Native Hawaiian or Other Pacific Islander, Other Race, White.
Exclusion Criteria: No exclusions.

Constrained to codes in the Patient Characteristic Race: Race value set (2.16.840.1.114222.4.11.836)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Race

Data elements that meet criteria using this datatype should document the patient’s race.

Timing: Race does not have a specific timing. Measures using Patient Characteristic, Race should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent gender identity restricted to only male and female used in administrative situations requiring a restriction to these two categories.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Sex.
Inclusion Criteria: Includes relevant concepts associated with gender concepts for male and female only.
Exclusion Criteria: Excludes any gender identity that is not male or female.

Constrained to codes in the Patient Characteristic Sex: ONC Administrative Sex value set (2.16.840.1.113762.1.4.1)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Sex

Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set.

Timing: Birth (administrative) sex does not have a specific timing.