Back to top
Top
CMS Measure ID:
Version:
8
NQF Number:
108
Performance/Reporting Period
2019
Description:

Percentage of children 6-12 years of age and newly dispensed a medication for attention-deficit/hyperactivity disorder (ADHD) who had appropriate follow-up care. Two rates are reported.

a. Percentage of children who had one follow-up visit with a practitioner with prescribing authority during the 30-Day Initiation Phase.

b. Percentage of children who remained on ADHD medication for at least 210 days and who, in addition to the visit in the Initiation Phase, had at least two additional follow-up visits with a practitioner within 270 days (9 months) after the Initiation Phase ended.

Data Elements contained within the eCQM + Expand all

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent a diagnosis of narcolepsy.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Diagnosis.
Inclusion Criteria: Includes only relevant concepts associated with diagnosis codes to identify narcolepsy.
Exclusion Criteria: No exclusions.

Constrained to codes in the Diagnosis: Narcolepsy value set (2.16.840.1.113883.3.464.1003.114.12.1011)

QDM Datatype and Definition (QDM Version 5.3)

Diagnosis

Data elements that meet criteria using this datatype should document the Condition/Diagnosis/Problem and its corresponding value set. The onset dateTime corresponds to the implicit start dateTime of the datatype and the abatement dateTime corresponds to the implicit stop dateTime of the datatype. If the abatement dateTime is not present, then the diagnosis is considered to still be active. When this datatype is used with timing relationships, the criterion is looking for an active diagnosis for the time frame indicated by the timing relationships.

Timing: The Prevalence Period references the time from the onset date to the abatement date.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had a behavioral health follow-up visit.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with health and behavior assessment or intervention, or education and training for patient self-management by a physician or other qualified health care professional.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Behavioral Health Follow-up Visit value set (2.16.840.1.113883.3.464.1003.101.12.1054)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who received observational stay discharge day management.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with services provided to a patient on discharge from outpatient hospital observation status if the discharge is on other than the initial date of observation status.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Discharge Services- Observation Care value set (2.16.840.1.113883.3.464.1003.101.12.1039)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent the most common inpatient encounter types.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter. The intent of this data element is to identify patients who have had an inpatient encounter.
Inclusion Criteria: Includes only relevant concepts associated with SNOMED CT codes representing inpatient encounter.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Encounter Inpatient value set (2.16.840.1.113883.3.666.5.307)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had a home health visit by a provider for the evaluation or management of a new or existing patient.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with home visits for the evaluation and management of a new or established patient. This is a grouping value set of CPT and SNOMED CT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Home Healthcare Services value set (2.16.840.1.113883.3.464.1003.101.12.1016)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent initial inpatient hospital observation care.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with initial observation care for the evaluation and management of a patient. This is a grouping of CPT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Hospital Observation Care - Initial value set (2.16.840.1.113883.3.464.1003.101.12.1002)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent inpatient encounters.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying inpatient encounters.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Inpatient Encounter value set (2.16.840.1.113883.3.464.1003.101.12.1060)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had an office or other outpatient visit.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity. This is a grouping value set of CPT codes.
Exclusion Criteria: Excludes non-office visits, including telehealth services.

Constrained to codes in the Encounter, Performed: Office Visit 1 value set (2.16.840.1.113883.3.464.1003.101.12.1001)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have had an outpatient interaction at an office with a member of their medical care team.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity. This is a grouping value set of CPT and SNOMED CT codes.
Exclusion Criteria: Excludes non-office visits, including telehealth services.

Constrained to codes in the Encounter, Performed: Outpatient Consultation value set (2.16.840.1.113883.3.464.1003.101.12.1008)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent group counseling services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying preventive medicine counseling and/or risk factor reduction intervention(s) provided to individuals in a group setting.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Preventive Care Services - Group Counseling value set (2.16.840.1.113883.3.464.1003.101.12.1027)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, to be associated with patients 0-17 years of age, that have no prior outpatient professional services from the physician practice in the last 3 years.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with ages 0-17, and that indicate initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, for a patient that has no prior outpatient professional services from the physician practice in the last 3 years. This is a grouping value set of CPT codes.
Exclusion Criteria: Excludes codes that are not for comprehensive preventive medical evaluations and codes that are for patients who have been seen in the last 3 years.

Constrained to codes in the Encounter, Performed: Preventive Care Services, Initial Office Visit, 0 to 17 value set (2.16.840.1.113883.3.464.1003.101.12.1022)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients who have received preventive medicine counseling and/or risk factor reduction interventions.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with counseling, anticipatory guidance, and risk factor reduction interventions. Preventative care and individual counseling encounters can be 15 to 60 minutes. This is a grouping of CPT codes.
Exclusion Criteria: Excludes codes for services performed in the emergency department, including critical care and observation services.

Constrained to codes in the Encounter, Performed: Preventive Care Services-Individual Counseling value set (2.16.840.1.113883.3.464.1003.101.12.1026)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, to be associated with patients 0-17 years of age, that received prior outpatient professional services from the physician practice in the last 3 years.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with ages 0-17, and indicating initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, for a patient that received prior outpatient professional services from the physician practice in the last 3 years. This is a grouping value set of CPT codes.
Exclusion Criteria: Excludes codes that are not for comprehensive preventive medical evaluations and codes that are for patients who have not been seen in the last 3 years.

Constrained to codes in the Encounter, Performed: Preventive Care, Established Office Visit, 0 to 17 value set (2.16.840.1.113883.3.464.1003.101.12.1024)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent visits during which a psychiatric diagnostic evaluation is completed.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with visits with the completion of psychiatric diagnostic evaluations.
Exclusion Criteria: Excludes group psychotherapy or family psychotherapy.

Constrained to codes in the Encounter, Performed: Psych Visit - Diagnostic Evaluation value set (2.16.840.1.113883.3.526.3.1492)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent visits for psychotherapy.
Data Element Scope: This value set may use the Quality Data Model (QDM) category related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with visits for individual psychotherapy services.
Exclusion Criteria: Excludes group psychotherapy or family psychotherapy.

Constrained to codes in the Encounter, Performed: Psych Visit - Psychotherapy value set (2.16.840.1.113883.3.526.3.1496)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent psychotherapy services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying psychotherapy services.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Psychotherapy and Pharmacologic Management value set (2.16.840.1.113883.3.464.1003.101.12.1055)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent telehealth services.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with identifying telehealth services, including telephone and online evaluation and management services.
Exclusion Criteria: No exclusions.

Constrained to codes in the Encounter, Performed: Telehealth Services value set (2.16.840.1.113883.3.464.1003.101.12.1031)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent telephone management.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Encounter, Performed.
Inclusion Criteria: Includes only relevant concepts associated with all relevant codes used to identify assessment and management services to a patient by telephone. This is a grouping of CPT codes.
Exclusion Criteria: Excludes telephone assessment and management services that last for less than five minutes.

Constrained to codes in the Encounter, Performed: Telephone Management value set (2.16.840.1.113883.3.464.1003.101.12.1053)

QDM Datatype and Definition (QDM Version 5.3)

Encounter, Performed

Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed.

Timing: The Relevant Period addresses:

  • startTime – the time the encounter began (admission time)
  • stopTime – the time the encounter ended (discharge time)

The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained.

The Location Period is an attribute of the attribute facility location addresses:

  • startTime - the time the patient arrived at the location;
  • stopTime - the time the patient departed from the location

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent encounters in an ambulatory setting.
Data Element Scope: This value set may use the Quality Data Model (QDM) category or attribute related to Encounter.
Inclusion Criteria: Includes only relevant concepts associated with care in an ambulatory setting.
Exclusion Criteria: Excludes patients who had ambulatory hospice care.

Constrained to codes in the Facility Locations: Ambulatory value set (2.16.840.1.113883.3.464.1003.122.12.1003)

QDM Attribute and Definition (QDM Version 5.3)

Facility Locations

The particular locations in a facility in which the diagnostic study or encounter occurs or occurred. Examples include, but are not limited to, intensive care units (ICUs), non- ICUs, burn critical-care unit, neonatal ICU, and respiratory-care unit. Each Encounter, Performed may have 1 or more locations. For example, a patient treated in multiple locations during an individual encounter might be expressed as: Encounter, Performed: Inpatient Admission, ICU (location period), Non-ICU Admission (location period), Rehab (location period). Facility Locations (plural) is used for Encounter, Performed since there may be more than one facility location used in any given encounter.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Procedure, Order or Intervention, Order. The intent of this value set is to identify all patients receiving hospice care outside of a hospital or long term care facility.
Inclusion Criteria: Includes only relevant concepts associated with hospice care concepts.
Exclusion Criteria: Excludes concepts for palliative care or comfort measures.

Constrained to codes in the Intervention, Order: Hospice care ambulatory value set (2.16.840.1.113762.1.4.1108.15)

QDM Datatype and Definition (QDM Version 5.3)

Intervention, Order

Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set.

Timing: The time the order is signed; Author dateTime

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent patients receiving hospice care outside of a hospital or long term care facility.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Procedure, Order or Intervention, Order. The intent of this value set is to identify all patients receiving hospice care outside of a hospital or long term care facility.
Inclusion Criteria: Includes only relevant concepts associated with hospice care concepts.
Exclusion Criteria: Excludes concepts for palliative care or comfort measures.

Constrained to codes in the Intervention, Performed: Hospice care ambulatory value set (2.16.840.1.113762.1.4.1108.15)

QDM Datatype and Definition (QDM Version 5.3)

Intervention, Performed

Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set.

Timing: The Relevant Period addresses:

  • startTime – the time the intervention begins
  • stopTime – the time the intervention ends

NOTE - timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent attention deficit hyperactivity disorder (ADHD) medications.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Medication, Active and Medication, Dispensed.
Inclusion Criteria: Includes only relevant concepts associated with semantic clinical drugs (concepts associated with component, form and strength); generic; prescribable; ADHD medications only.
Exclusion Criteria: No exclusions.

Constrained to codes in the Medication, Active: ADHD Medications value set (2.16.840.1.113883.3.464.1003.196.12.1171)

QDM Datatype and Definition (QDM Version 5.3)

Medication, Active

Data elements that meet criteria using this datatype should document that the medication indicated by the QDM category and its corresponding value set is being taken by the patient. Keep in mind that when this datatype is used with timing relationships, the criterion is looking for a medication being taken for the time frame indicated by the timing relationships.

Timing: The Relevant Period addresses:

  • startTime - when the medication is first known to be used (generally the time of entry on the medication list),
  • stopTime - when the medication is discontinued (generally, the time discontinuation is recorded on the medication list)

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent attention deficit hyperactivity disorder (ADHD) medications.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Medication, Active and Medication, Dispensed.
Inclusion Criteria: Includes only relevant concepts associated with semantic clinical drugs (concepts associated with component, form and strength); generic; prescribable; ADHD medications only.
Exclusion Criteria: No exclusions.

Constrained to codes in the Medication, Dispensed: ADHD Medications value set (2.16.840.1.113883.3.464.1003.196.12.1171)

QDM Datatype and Definition (QDM Version 5.3)

Medication, Dispensed

Data elements that meet criteria using this datatype should document that a prescription for the medication indicated by the QDM category and its corresponding value set has been dispensed and provided to the patient or patient proxy. In the ambulatory setting, medications are primarily taken directly by patients and not directly observed. Hence, dispensed, or fulfillment, information is the closest health provider documentation of medication compliance. In settings where patients attest to taking medications in electronic format (perhaps a Personal Health Record), patient attestation of medication taken may be available. The QDM datatype, Medication, Administered addresses medication taken; to address the source of the information, a measure addressing such patient attestation would require use of the dataflow attribute, source.

Timing: The time the medication dispensing event occurs; the Author dateTime.

Timing: The Relevant Period addresses:

  • startTime - when the first administration of the medication is expected. If not specified. the startTime defaults to the Author dateTime (the time the medication dispensing event occurs).
  • stopTime - when the medication supply provided by the dispensing event is expected to be completed.

Note that when calculating cumulative medication duration, the medication dispensed stopTime may be present directly in the fulfillment record. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times. The record may indicate which of the available refills the fulfillment represents but each dispensing event is unique. Therefore, the measure developer should use CQL logic to address multiple dispensing events over a period of time.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent whether the patient is Hispanic or not; ethnicity category defined by the Centers for Disease Control and Prevention and National Center for Health Statistics.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Ethnicity.
Inclusion Criteria: Includes only relevant concepts associated with ethnicity defined as Hispanic or Latino, or Not Hispanic or Latino.
Exclusion Criteria: No exclusions.

Constrained to codes in the Patient Characteristic Ethnicity: Ethnicity value set (2.16.840.1.114222.4.11.837)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Ethnicity

Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set.

Timing: Ethnicity does not have a specific timing. Measures using Patient Characteristic, Ethnicity should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Payer.
Inclusion Criteria: Includes only relevant concepts associated with payer codes in the code system.
Exclusion Criteria: No exclusions.

Constrained to codes in the Patient Characteristic Payer: Payer value set (2.16.840.1.114222.4.11.3591)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Payer

Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set.

Timing: The Relevant Period addresses:

  • startTime – the first day of insurance coverage with the referenced payer
  • stopTime – the last day of insurance coverage with the referenced payer

 

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent the general race category reported by the patient - subject may have more than one; defined by the Centers for Disease Control and Prevention and National Center for Health Statistics.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Race.
Inclusion Criteria: Includes only relevant concepts associated with the following race categories: American Indian or Alaska Native, Asian, Black or African American, Native Hawaiian or Other Pacific Islander, Other Race, White.
Exclusion Criteria: No exclusions.

Constrained to codes in the Patient Characteristic Race: Race value set (2.16.840.1.114222.4.11.836)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Race

Data elements that meet criteria using this datatype should document the patient’s race.

Timing: Race does not have a specific timing. Measures using Patient Characteristic, Race should address the most recent entry in the clinical record.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent gender identity restricted to only male and female used in administrative situations requiring a restriction to these two categories.
Data Element Scope: This value set may use the Quality Data Model (QDM) datatype related to Patient Characteristic Sex.
Inclusion Criteria: Includes relevant concepts associated with gender concepts for male and female only.
Exclusion Criteria: Excludes any gender identity that is not male or female.

Constrained to codes in the Patient Characteristic Sex: ONC Administrative Sex value set (2.16.840.1.113762.1.4.1)

QDM Datatype and Definition (QDM Version 5.3)

Patient Characteristic Sex

Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set.

Timing: Birth (administrative) sex does not have a specific timing.

Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent a mental health diagnoses.
Data Element Scope: This value set may use the Quality Data Model (QDM) attribute related to Principal Diagnosis.
Inclusion Criteria: Includes only relevant concepts associated with identifying mental health diagnoses.
Exclusion Criteria: No exclusions.

Constrained to codes in the Principal Diagnosis: Mental Health Diagnoses value set (2.16.840.1.113883.3.464.1003.105.12.1004)

QDM Attribute and Definition (QDM Version 5.3)

Principal Diagnosis

The coded diagnosis/problem established after study to be chiefly responsible for occasioning the admission of the patient to the hospital for care.
Value Set Description from VSAC
Clinical Focus: This value set contains concepts that represent substance abuse.
Data Element Scope: This value set may use the Quality Data Model (QDM) attribute Principal Diagnosis.
Inclusion Criteria: Includes only relevant concepts associated with diagnosis codes that identify substance abuse. This is a grouping of ICD-10-CM and SNOMED CT codes.
Exclusion Criteria: No exclusions.

Constrained to codes in the Principal Diagnosis: Substance Abuse value set (2.16.840.1.113883.3.464.1003.106.12.1004)

QDM Attribute and Definition (QDM Version 5.3)

Principal Diagnosis

The coded diagnosis/problem established after study to be chiefly responsible for occasioning the admission of the patient to the hospital for care.